Plumbing & Consumables

The Polypipe UFHTHIMW Single Zone Thimble Sensor provides accurate temperature monitoring for single zone underfloor heating systems. Designed for reliable performance, it ensures efficient heating control and enhanced energy efficiency in both residential and commercial installations.

The Stanley ControlGrip 150mm (6in) Long Nose Cutting Pliers deliver precision cutting and gripping for electrical, mechanical and general trade use. Featuring ergonomic ControlGrip handles for improved comfort and control, they are ideal for tight access work, wire cutting and detailed installation tasks.

The 35mm Chrome Waste Pipe Collar provides a neat, decorative finish for exposed waste pipes, helping to conceal pipework where it passes through walls or floors. Ideal for bathroom and kitchen installations, its polished chrome finish delivers a clean, professional look while improving overall aesthetics in modern plumbing systems.

The Polypipe SWT26SG Single Branch 4in/110mm 92½° is a high‑quality solvent‑grey PVCu fitting designed for above‑ground soil and vent systems. Featuring a 110 mm (4 in) diameter, 92½° angle and triple‑socket (4‑boss) design, it provides a reliable and straight‑forward solution for branching in residential drainage systems. Ideal for mending or installing multi‑branch soil stacks with a seamless solvent‑weld connection.

The Polypipe FIT1515 branch and one‑end reduced tee (15 mm × 10 mm × 10 mm) is a white, push‑fit plumbing fitting designed for quick and reliable installation in domestic hot and cold water systems. Ideal for first‑fix plumbing, it allows you to branch from a 15 mm run into two 10 mm feed lines with confidence and ease.

The Torbeck Ballvalve Diaphragm Washer DT02999-N is a reliable replacement part designed for Torbeck inlet valves. Ideal for restoring proper toilet cistern function, this durable diaphragm washer helps prevent leaks and ensures efficient water control in UK plumbing systems.

The Bailey 102mm (4”) Drain Test Blanking Plug BAI1960 is designed for secure and reliable drainage system testing. Ideal for temporarily sealing pipes during pressure testing, this durable blanking plug ensures leak-free performance for professional and domestic drainage installations.

The Polypipe FIT1928 Socket Blank End 28 mm is a white PolyFit push‑fit fitting designed to securely seal off a 28 mm pipe run in your plumbing system. Its hand‑demountable design offers flexible installation and convenient access for future modifications, making it ideal for first‑fix or maintenance situations.

The Polypipe FIT228 28 mm Equal Tee is a white PolyFit push‑fit fitting designed for hot and cold water plumbing systems. Offering a 28 mm × 28 mm × 28 mm configuration, this hand‑demountable tee provides easy, secure connections and is ideal for first‑fix installations.

The Polypipe FIT5822 Reducing Coupler 22 mm × 15 mm delivers a reliable push‑fit solution for connecting a 22 mm supply pipe to a 15 mm feed line. Crafted in white PolyFit, this hand‑demountable fitting offers quick, fuss‑free installation and future maintenance flexibility — perfect for first‑fix plumbing in hot and cold water systems.

The Waterproof Stem Thermometer M32 REGM32 is a durable replacement thermometer designed for use with the Therma-Flo FloCup system (REGM31). Offering a wide temperature range from -50°C to +150°C, it provides accurate and reliable readings for plumbing, heating, and industrial applications. Its waterproof design ensures dependable performance in demanding environments, making it ideal for professional temperature monitoring and system maintenance.

The Fabdec Thermostat 951879A is a reliable replacement temperature control component designed for use in heating and hot water systems. Built for accuracy and durability, it helps regulate system temperature efficiently, supporting safe and consistent boiler and cylinder performance. Ideal for servicing, repairs, and maintenance of compatible heating installations.

The Mains Water Stopcock Label VP101 is a clear and durable identification label designed to mark the location of mains water shut off valves. Featuring an easy-to-read pictogram, it helps ensure quick identification in emergencies and routine maintenance. Ideal for domestic, commercial, and industrial plumbing installations, this label supports safety compliance and efficient water system management.

The Heatline D003200463 O-Ring Plate Heat Exchanger is a genuine replacement sealing component designed for Heatline boilers. It ensures a secure, leak-free connection within the plate heat exchanger assembly, supporting efficient heat transfer and reliable system performance. Ideal for boiler servicing, repairs, and maintenance, this part helps restore heating and hot water efficiency in compatible Heatline systems.

The Bahco SL25 25pc Socket Set (BAHSL25) is a high-quality 1/4" drive hex socket and bit set designed for precision fastening tasks. Supplied with a comprehensive selection of sockets and accessories, it is ideal for automotive work, mechanical repairs, and general maintenance. Built for durability and professional performance, this compact set is perfect for both tradespeople and DIY users.

Fibo Wall Panel Sealant 290ml in grey is a high-performance waterproof sealant designed for secure, watertight joints in bathroom wall panel installations. Ideal for wet rooms and shower areas, it provides a durable, mould-resistant finish for a clean professional look.

The 20mm MDPE Copper Olive BFMOC-20 provides a secure, watertight seal for compression fittings in MDPE water and plumbing systems. Designed for durability and reliable performance, it’s ideal for professional installers and DIY users working on mains water connections and pipe fittings.

The PrimaPress Pressfit Fitting Reducer 22 x 15mm (30076211) is a high-quality fitting designed to seamlessly connect different pipe sizes in plumbing and heating systems. Featuring press-fit technology for fast, secure, and leak-free installation, it is perfect for both professional installers and DIY enthusiasts. Built for durability and long-lasting performance, this reducer ensures efficient water flow and reliable operation in all applications. Shop at Plumbco for trusted PrimaPress fittings and fast delivery.

The Washing Machine Hose Washer 3/4" (368011) is a high-quality replacement washer designed to ensure a secure, leak-free connection between washing machine hoses and taps. Ideal for both DIY users and professional plumbing repairs, this durable washer helps maintain efficient water flow and prevents leaks in household laundry systems. Shop Plumbco for trusted plumbing parts and fast delivery.

The Poly Tank Washer 1" (PWATAN367441) is a high-quality replacement washer designed to provide a secure, leak-free seal for water tank and plumbing connections. Ideal for both domestic and commercial applications, this durable washer ensures reliable performance and prevents leaks in tanks, cisterns, and pipe fittings. Perfect for quick DIY repairs or professional plumbing projects, it guarantees long-lasting efficiency. Shop Plumbco for trusted plumbing components with fast delivery.