Solder Ring 15mm Coupling

Push-fit bent tap plastic fitting for the connection of plastic and copper pipe. Simply push the bent tap fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.

The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

Upgrade your plumbing setup with the Speedfit Equal Elbow 15mm. Engineered for efficiency and longevity, this elbow facilitates smooth turns in your piping system. Its hassle-free installation process ensures a secure fit, while its durable construction guarantees reliable performance. Trust Speedfit for top-notch plumbing solutions tailored to your needs.

Upgrade your plumbing system with the Speedfit Equal Tee 15mm. Crafted for efficiency and durability, this tee ensures seamless connections in your piping network. Its innovative design allows for quick installation without compromising on performance. Trust Speedfit for reliable solutions that meet your plumbing needs.

Speedfit PSE3201W Female Coupler 15mmx1/2" BSP

Speedfit PSE3203W Female Coupler 15mmx3/4" BSP

Speedfit FLX15 Flexi Hose 15mm x 1/2" x 300mm

Speedfit FLX16 Flexi Hose 15mm x 3/4" x 300mm

Speedfit FLX17 Flexi Hose 15mm x 15mm x 300mm

The reducer push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.

The reducer fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

The reducer push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.

The reducer fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

The reducer push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.

The reducer fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

The reducer push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.

The reducer fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.

Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.

The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.

Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.

The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.

Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.

The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.

Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.

The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.

Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.

The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.

Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.

The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

The stem elbow is a seamless push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.

Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.

The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the stop end fitting fully onto the pipe up to the pipe stop. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release.

The stop end fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

Push-fit fitting equal straight connector from JG Speedfit for joining two pipes of the same size. Merely press the push-fit fitting onto the pipe, and lock it in place by clockwise rotating the plastic nut. To unlock the nut manually, push the collet towards the push-fit fitting's body, then pull the pipe to remove the connection.

The JG Speedfit equal straight connection push-fit fitting eliminates the need for hot works and tools, making it easier to use in confined spaces. It is also up to 40% faster to install than conventional methods. UK-based designers, manufacturers, and assemblers.

Push-fit plastic straight tap connector for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.

Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.

The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

Push-fit plastic straight tap connector for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.

Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.

The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

Experience the enhanced dual-action seal and increased rigidity with the Superseal pipe insert from Plumbco-online. Designed with two extra O-rings, this insert ensures secure connections between JG Speedfit pipes and push-fittings while maintaining the round shape of the pipe ends. Shop now for reliable pipe inserts that provide valuable support to your pipework.

The tank connector is a push-fit fitting for the connection of plastic and copper pipe to a cold water tank. To install, simply push the fitting fully on to the pipe and hand tighten the connector to the tank. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release.

The fitting ensures an easier working environment in confined places and removes the need for hot works in the loft environment.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

To be used when connecting a Speedfit pipe to a Speedfit fitting or connecting a Speedfit pipe to a compression fitting.

Note: Inserts must be used on all Speedfit connections.