Products tagged with 'danfoss'

The Danfoss RET2001M‑V2 (230 V, part 087N6476) is a mains-powered digital room thermostat engineered for intuitive, precise control of your heating system. Its large backlit LCD, frost-protection and holiday mode help reduce energy waste, while the user-friendly interface and robust build make it ideal for domestic or commercial installations.

The Danfoss HPA2 (087N6579) is a robust 230 V, 2‑port spring‑return actuator with SPST auxiliary switch designed for H‑series motorised shoe valves. It features a manual override lever for filling, fast opening (≤ 35 s) and closing (≤ 20 s), and a voltage‑free SPST contact — ideal for controlling central heating or hot water flow in domestic or commercial systems.

The Danfoss HP28 2‑Port Motorised Valve 28 mm (part 087N6611) is a robust motorised zone valve with external compression connections, shoe‑type valve body and integrated actuator. Designed for domestic heating systems with 28 mm pipework, it offers reliable open/close control, tight shut‑off and compatibility with both copper and iron pipe installations.

The Danfoss WC4B Wiring Centre (part 087N739900) is a mains-wired junction box tailored for modern heating and hot-water systems. Featuring a spacious 16-way terminal block and pre-cut wiring links, it delivers a clean, simplified wiring layout for efficient installation and service.

The Danfoss RA Remote Temperature Adjuster (2m, Manufacturer Code: 013G5062) provides precise remote control of radiator temperature settings. Designed for improved heating efficiency, it offers frost protection along with adjustable limiting and locking of set-point temperatures, ideal for domestic and commercial heating systems.

The Danfoss HSA3 (087N6587) is a reliable 230 V, 3-port mid-position spring-return actuator for H-series motorised valves. Featuring an internally-linked SPST auxiliary switch, it provides precise control over heating and hot water flow. Its fast response (≤ 35s open / ≤ 20s close) and manual override lever make it a dependable choice for upgrades or replacements in domestic and commercial heating systems.

The Danfoss RA-FN DN20 Angle Radiator Valve (013G0025) is a fixed-capacity radiator valve designed for two-pipe central heating systems. Featuring an angle-pattern design and nickel-plated finish, this valve is intended for compatible radiator installations requiring a standard-flow connection without presetting.

The valve has a DN20 size, with ¾-inch connections, and is designed to operate in heating systems with flow temperatures of up to 120°C. Its fixed-capacity design provides flow characteristics defined by the valve specification rather than an adjustable presetting function.

Please note: Danfoss lists this model as discontinued. Check availability and compatibility before ordering, particularly if you are replacing an existing radiator valve.

The Danfoss RAS-C2 10mm Angled Thermostatic Radiator Valve (013G6055) is a bi-directional TRV pack designed to provide reliable temperature control for radiators. The set includes a RAS-C2 liquid sensor and RA-FS 10mm bi-directional angled valve, allowing the valve to be installed on either the flow or return pipe.

The RAS-C2 provides adjustable temperature control from 8°C to 28°C and features a built-in liquid sensor for responsive operation. Its bi-directional valve design provides flexibility when installing or replacing a radiator valve.

The Danfoss RAS-C2 15mm Angled Thermostatic Radiator Valve (013G6050) is a bi-directional TRV pack designed for reliable radiator temperature control. The set includes a RAS-C2 liquid sensor and RA-FS 15mm bi-directional angled valve, allowing the valve to be installed on either the flow or return pipe.

The RAS-C2 provides adjustable temperature control from 8°C to 28°C, with a built-in liquid sensor and a response time of approximately 22 minutes. Its bi-directional valve design provides flexibility when installing or replacing a radiator valve.

The Danfoss RAS‑C2 Radiator Valve Kit (part 013G6005) is a compact, high‑performance radiator valve pack designed for modern two‑pipe domestic heating systems. It includes a built‑in sensor head, a bi‑directional RA‑FS 15 mm angle valve body and matching RLV‑D lockshield valve — ideal for installations where flow direction may vary and easy temperature regulation is required.

The Danfoss RAS-D2 combi pack (013G6013) combines a high-performance liquid sensor with a 15 mm RA-FS bi-directional angled valve. It supports 8/10/15 mm fittings and features flow-selectable “revolver” technology to eliminate water-hammer. Temperature range is 8–28 °C, with a frost-protection setting and a positive-off feature for flexible control in two-pipe domestic heating systems.

The Danfoss RET1001M (087N6460) is a mains-powered electronic dial room thermostat designed to provide temperature control for central heating systems. Operating from a 230V AC supply, it features a simple adjustable dial, frost protection and a status indicator to show heating demand.

This single-channel thermostat uses ON/OFF modulating control and is designed for a three-wire installation. Please note that the RET1001M has been discontinued, so availability may be limited.

The Danfoss RET1001M-V2 (087N6461) is a mains-powered electronic room thermostat designed for straightforward central heating control. It features an adjustable temperature dial, frost protection and a standby setting, making it a practical choice for compatible room-heating systems.

LED indicators show when the thermostat has power and when there is a demand for heat. Its ON/OFF load-compensation control supports responsive heating operation, while the simple dial makes temperature adjustment easy.

The Danfoss RET230P electronic room thermostat (087N743000) provides accurate temperature control for central heating systems. Designed for a 230V AC mains supply, it features volt-free SPDT switching contacts suitable for mains or low-voltage switching applications, subject to system compatibility.

Its simple, unobtrusive design makes it suitable for a range of heating installations, while the adjustable temperature setting allows users to select their preferred room temperature.

The Danfoss TP9000 is a programmable room thermostat with domestic hot water (DHW) time control. This product has been discontinued by Danfoss.

Replacement: Danfoss TPOne-M Programmable Room Thermostat, 087N785200, is the current replacement listed by Danfoss for the TP9000 Si.

The TP9000 provided programmable control of central heating and domestic hot water, with selectable 7-day, 5/2-day or 24-hour operating modes and up to three DHW on/off events per day.

The Danfoss TS710 (087N7881) is a high‑quality, single‑channel 230 V digital timeswitch designed for central heating systems. With its intuitive backlit LCD and flexible scheduling (7‑day, 5/2‑day or 24‑hour), you can programme up to three on/off heating periods per day. The TS710 also supports auto, +1 hour boost, on/off override, and holiday mode - helping you optimise comfort and energy use. Its volt‑free relay output makes it ideal for controlling boilers or motorised valves in residential heating setups.