Products tagged with 'boiler health'

The Fernox Electrolytic Scale Reducer 22mm Compression is an in-line water treatment device designed to help prevent the build-up of limescale throughout the home.

Using electrolytic principles, it alters the structure of hardness salts in the water, encouraging them to coagulate and helping reduce the formation of scale in appliances and hot water systems. It provides whole-house protection against limescale and is effective immediately after installation.

The scale reducer is maintenance-free and can be installed on horizontal or vertical pipework using 22mm compression fittings. Under average domestic water usage, it can remain effective for up to 10 years, depending on water usage levels.

The unit is made from forged, nickel-plated brass and is WRAS approved. It is pressure rated to 10 bar at 20°C and is designed for cold feed applications.

The Fernox TF1 Omega Filter 22mm Slip Socket is a high-performance in-line central heating system filter designed to protect domestic heating systems from circulating corrosion debris, sludge, scale and installation contaminants.

Its precision-engineered design combines powerful neodymium magnetic filtration with Fernox Hydronic Particle Separation (HPS) technology to capture both magnetic and non-magnetic contaminants from system water.

The compact design makes the TF1 Omega particularly suitable for installations where space is restricted. It can be installed on horizontal or vertical 22mm pipework, in either flow direction, and can be positioned at up to 45° from vertical where required.

The nickel-plated forged brass construction provides a robust and durable filter body, while the sealed design allows the filter to be cleaned quickly without dismantling the unit.

The TF1 Omega is ideally installed on the return pipe to the boiler and can also provide a convenient dosing point for Fernox Express water treatment products.

The filter is backed by a 25-year warranty from Fernox.

The Fernox TF1 Omega Filter is a high-performance, compact in-line magnetic filter designed to protect domestic central heating systems from circulating corrosion, scale and installation debris.

The TF1 Omega combines powerful magnetic filtration with Hydronic Particle Separation (HPS) technology to capture both magnetic and non-magnetic contaminants from system water. Its compact design makes it particularly suitable for installations where space is restricted.

This 22mm version is supplied with valves, making installation and servicing straightforward. The filter can be fitted to horizontal or vertical pipework, in either flow direction, and can be positioned up to 45° from vertical where access or headroom is limited.

The filter is designed to be installed on the return pipe to the boiler. It can be cleaned in situ without dismantling the unit, helping to make routine maintenance quick and convenient.

The Fernox TF1 Sigma HP Filter 28mm With Valves is a high-performance system filter specifically designed to protect air source and ground source heat pump systems from circulating debris and contaminants.

Using Fernox's unique filtration technology, the TF1 Sigma HP Filter is designed to capture a wide range of system debris, including magnetic and non-magnetic contaminants, even at the high flow rates typical of heat pump installations. It is designed to maintain low pressure loss and help the heat pump operate efficiently.

The filter is supplied with 28mm full-bore valves as standard, helping to minimise flow restriction through the filter assembly. It can be installed horizontally or vertically and is ideally fitted on the return pipe to the heat pump. Where space is restricted, it can also be installed up to 45° from vertical.

Cleaning is quick and straightforward through the drain valve, without needing to dismantle the filter or shut down the system. The sealed filter design also reduces ongoing maintenance requirements.

The TF1 Sigma HP is compatible with water, inhibited glycol solutions and Fernox system additives, with a maximum glycol concentration of 50%.

The Fernox TF1 Sigma UB Filter is a compact 22mm magnetic heating system filter designed for installation underneath boilers and in restricted spaces where a conventional in-line filter may not be suitable.

The under-boiler design features a durable glass-reinforced engineering polymer filter body and a forged brass manifold, providing a robust solution for protecting heating systems from circulating corrosion debris, including magnetite.

A powerful neodymium magnet captures ferrous contaminants from the system water, while the engineered flow path is designed to provide high collection efficiency without blocking or restricting flow. The integrated three-way valve allows the filter to be isolated and cleaned through the drain point without dismantling the filter.

Designed to be installed horizontally on the return to the boiler, the TF1 Sigma UB is particularly useful where space is limited or pipework is concealed. Separate flexible or corrugated pipes and/or adapters may be required for some installations and are not supplied.